The M120 External Temperature Probe is designed for inclement weather outside and harsh environments inside. Ideal for temperature measurements outdoors, in industrial plants, cold storage, laboratories, and research areas. Designed to perform. Built to last.
This temperature probe is only for use with the TempEye° M120 Series Thermometers.
Reflects thermal radiation and protects microprocessor temperature sensor.
Colored with carbon black to combat the effect of the sun's ultraviolet radiation.
Mounted with a spring clip to reduce heat transfer from mount surface to probe shield.
-40 <> 125 °C
-40 <> 257 °F
233 <> 398 °K
+/-0.25 °C from -40 to 125 °C
< 0.01 °C/Year
Silicon Labs Si7051
RJ9 with locking tab
Polished corrosion resistant
2.5in (64mm) tall
0.275in (7mm) diameter
Made in USA
Sensor accuracy +/- 0.25 °C, from -40 - 125 °C (+/- 0.5 °F from -40 - 257 °F). Stability variance less than 0.01 °C/Year (0.02 °F/Year).
When you plug in the external temperature probe to a M120 Series Thermometer, the thermometer immediately begins to display its measurement on the front panel. Unplug the probe and the TempEye° M120 switches back to the remaining plugged in sensors.
We carefully test and choose each component to last. From the metal shield, internal circuit board, trace widths, component lifetimes, range and tolerances, to cycle tests, every part is carefully tested and selected.
Temperature probe cable has a locking RJ9 modular connector to ensure cable does not writhe loose from movement and vibration.